New Zealand Delivery |
Hot Water Sorted
Home / Cylinders / Haier Heat Pump Split System 300L
Haier Heat Pump Split System 300L
Heat Pump

Haier Heat Pump Split System 300L

Model HP300S2-F7 — quote this when you order, so you get the right one.
$3,650 incl GST · supply only
300LCapacity
Heat PumpType
1694mmHeight
580mmWidth
Ships in 5–10 working days Need it sooner? Email us to check stock
Free delivery in Auckland — and free anywhere else in New Zealand too. We agree a day with you rather than leaving it at the gate.
Pick up available across New Zealand — free from 30 pickup points. See addresses →
Outside Auckland? Please email us first so we can check stock before you order — [email protected].

Questions first? Email us or use the form below.

Published data

Specifications

HP300S2-F7
Model
HP300S2-F7
Capacity
300 litres (276 L stored)
Noise
52 dB at 1 m
Works down to
-15°C, the widest range of any heat pump we stock
Corrosion protection
Three magnesium anode rods
Dimensions
580 w x 1694 h x 622 d
Outdoor unit
780 w x 545 h x 286 d
System
Split — tank plus outdoor unit
Tank
Indoor or outdoor
Outdoor unit
Wall or ground mounted

Figures are the manufacturer's published data for this model. Delivered across New Zealand for a flat $30. Delivery details.

A split system separates the tank from the compressor. The tank can stay in the cupboard the old cylinder came out of, and only a small outdoor unit goes on the wall outside — so this is the heat pump for a house with no room for a full monoblock, or where you do not want a large unit against the exterior wall. The two are joined by refrigerant lines, which is extra work at install time and worth factoring into a quote.

  • Tank stays where the old cylinder was
  • Only a small unit goes outside
  • Largest capacity in the Haier range

Not sure if it will fit?

Measure the space you have and allow extra around the tank for the valves and pipework, and above it for the element and anode.

Find my cylinder
Size — drawn to scale
1,694 mm 580 mm

Drawn from the front. It is 622 mm deep. Allow room around it for the valves and pipework, and clearance above for servicing.

Need installation?

A cylinder has to be connected by someone licensed. We are, and we do it ourselves rather than passing you to a contractor.

Get an installation quote

Manufacturer's guide

Clearances, valve requirements and the electrical supply, straight from Haier. Worth reading before you book anyone in.

Haier split system heat pump — product page and documents

The price you see is the price

GST is included. Delivery is free in Auckland and anywhere else in New Zealand. Installation is quoted separately if you want it (Auckland only).

Returns

Faulty or wrongly supplied, we sort it. Changed your mind? You have 10 days from delivery if it is unopened, with return freight and a 20% restocking fee. Read the terms.

Warranty
7 years
Cylinder
5 years
Parts
5 years
Labour

Haier New Zealand: 7 year inner cylinder, 5 years parts and labour.

Commercial installs get less. The figures above are for a single family dwelling. Renting the house out does not change that, and neither brand decides it by who lives there. What does change it is the use, or one cylinder serving more than one dwelling: a salon, a catering kitchen, a care facility, a block of flats on a single cylinder. In those cases the manufacturer's cover drops to 1 year on the cylinder and 1 year parts and labour.

The labour cover depends on who installs it. Manufacturers only honour it when the cylinder was connected by a licensed plumber. We are one, so if we fit it the full warranty stands.

Ask about this cylinder

We reply the same day. Nothing is charged until we confirm price and delivery with you.